Evaluation of the Carbon Footprint of Rubberwood Lumber Production in Ghana
DOI:
https://doi.org/10.14738/aivp.104.12951Keywords:
Carbon footprint; Ghana’s timber industry; Life Cycle assessment; Lumber; Rubberwood.Abstract
A key source of wood for Ghana's timber sector is rubberwood. The characteristics and economic sustainability of rubberwood for the production of wood products with added value have been the subject of numerous studies. However, rubberwood and its environmental performance, as well as green labelling, which measures carbon footprint, are not well documented in Ghana. This study assessed the carbon footprint of timber production from rubberwood using the life-cycle approach. The cradle-to-gate method was applied where the study's key findings show that Ghana's production of rubberwood lumber has a carbon footprint of 158 kg/m3CO2-eq. This resulted from the adoption of processing technologies that were inefficient and produced significant waste and emissions both at the harvesting and in the milling stages. As a result, this study demonstrated that rubberwood timber has a significant carbon footprint, and efforts must be made to advance technology and reduce waste and emissions by considering rubberwood as a green material.
References
. FAO. (2020). Global forest resources assessment 2020: Main report. Rome. https://doi.org/10.4060/ca9825en
. Uzu, J., Bettinger, P., Siry, J. & Mei, B. (2022). Timber business in West Africa: a review and outlook. International Forestry Review, 24
(2), 240-256.
. Tomaselli, I. (2007). The allure of plantations. ITTO Tropical Forest Update. 17(1): 10-13. ITTO, Japan. 3
. Ratnasingam, J., Ramasamy, G., Ioras, F. & Parasuraman, N. (2017). Rubberwood carbon footprint. BioResources, 12 (2), 3490-3503.
. Eshun, J. F., Potting, J. & Leemans, R. (2010). Inventory analysis of the timber industry in Ghana. The International Journal of Life Cycle
Assessment, 15 (7), 715725. DOI: 10.1007/s11367-010-0207-0
. Eshun, J. F. (2019). Environmental assessment of tropical African mahogany (Khaya). African Journal of Environmental Science and
Technology, 13 (4), 172-180.
. ITTO. (2005). International Tropical Timber Organization. Annual review and assessment of the world timber situation, 2004. ITTO
Yokohama, Japan.
. Brundtland, G. H. (1987). Our common future: The world commission on environment and development. Oxford University Press.
. ISO/TS 14067. (2013). Greenhouse gases- Carbon footprint of products- Requirements and guidelines for quantification and
communication. International Organization for Standardization, Geneva, Switzerland.
. Passarini, F. & Ciacci, L. (Eds). (2020). Life Cycle Assessment LCA of environmental and energy systems. Energies, 13, 5892.
. ISO 14040. (2006). Environmental management - Life cycle assessment - Principles and framework, International Organisation
for Standardisation (ISO), Geneva.
. ISO 14044. (2006). Environmental management - Life cycle assessment – Requirements and guidelines, International
Organisation for Standardisation (ISO), Geneva.
. Martínez-Alonso, C. & Berdasco, L. (2015). Carbon footprint of sawn timber products of Castanea sativa Mill. in the north of
Spain. Journal of Cleaner Production, 102 (1), 127-135.
. IPCC 2008, 2006 IPCC Guidelines for National Greenhouse Gas Inventories – A primer, Prepared by the
National Greenhouse Gas Inventories Programme, Eggleston H.S., Miwa K., Srivastava N. and Tanabe K. (eds). IGES, Japan.
. Ratnasingam, J., Ramasamy, G., Lim, T. W., Abdul Latib, S. & Muttiah, N. (2012). The prospects of rubberwood biomass energy
production in Malaysia. BioResources 10 (2), 2526-2548.
. Bergman, R. D. & Bowe, S. A. (2012). Life-cycle inventory of manufacturing Southeastern United States. Wood and Fiber Science,
(1), 7184.
. Ratnasingam, J. & Scholz, F. (2009). Rubberwood an Industrial Perspective. World Resource Institute, Washington.
. Milota, M. R., West, C. D. & Hartley, I. D. (2005). Gate-to-gate life cycle inventory of softwood lumber production. Wood and Fiber
Science, 37 (SI), 47-57.
. Ramasamy, G., Ratnasingam, J., Edi Suhaimi, B., Rasmina, H. & Neelakandan, M. (2015). Assessment of environmental emissions
from sawmilling activity in Malaysia. BioResources, 10 (4), 6643-6662. DOI:10.15376/biores.10.4.6643-6662
. Saidur, R., Hasanuzzaman, M., Sattar, M. A., Masjuki, H. H., Irfan Anjum, M. & Mohiuddin, A. K. M. (2007). An analysis of energy
use, energy intensity and emissions at the industrial sector of Malaysia. International Journal of Mechanical and Materials
Engineering, 2 (1), 84-92.
. Muñoz, I., Rigarlsford, G., Canals, L. M. I. & King, H. (2013). Accounting for greenhouse gas emissions from the degradation of
chemicals in the environment. The International Journal of Life Cycle Assessment 18 (1), 252-262. DOI: 10.1007/s11367-012-0453-
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 John Frank Eshun, Eric Donkor Marfo Marfo, Gladys Ama Quartey
This work is licensed under a Creative Commons Attribution 4.0 International License.
